The MS1200M is an in-wall panel dual-band wireless access point that utilizes the 802.11a/b/g/n/ac Wave2 wireless network standard. It operates in both the 2.4GHz and 5GHz ISM wireless frequency bands, meeting the demand for high-speed wireless internet access for up to 64 concurrent users. It features a gigabit Ethernet interface and supports remote PoE power supply based on the 802.3af/at standard. In 2.4GHz 802.11n mode, it can support speeds of up to 300Mbps, and in 5GHz 802.11ac mode, it can support speeds of up to 867Mbps, providing a total wireless rate of up to 1200Mbps.
Technical Specifications
Hardware configuration | |
Main Chip | MT7621DAT+MT7603EN+MT7613BEN |
Frequency | MIPS dual-core 880MHz |
Memory | 128MB |
Flash | 16MB |
Wireless Technology | - 2.4G WiFi: 2x2 802.11b/g/n (Theoretical maximum - 5.8G WiFi: 2x2 (2-stream) MU-MIMO 802.11a/n/ac Wave2 (Theoretical maximum speed up to 867Mbps) - TxBF (Transmit Beamforming): Beamforming technology that concentrates the wireless signal in specific directions, enhancing the transmission and reception performance of the signal. |
Device Interfaces | WAN PoE*1/LAN*1 10/100/1000Mbps adaptive |
Buttons | Reset button for factory reset (long press for 6 seconds to reset) |
Indicators | Status indicators |
Antennas | Built-in 2.4G 2dBi FPC antenna * 2 Built-in 5G 2dBi FPC antenna * 2 |
Power | 48V 802.3af/at PoE power supply |
Operating/Storage Temperature | -10℃～45℃/-20℃～70℃ |
Operating/Storage Humidity | 10%～90%(non-condensing) / 5%～90%(non-condensing) |
Dimensions | 86*86*37mm |
Weight | 150g |
WiFi Spec | |
Frequency Range | 2.4G：2.4~2.4835GHz 5G: UNII-1: 5.15~5.35GHz UNII-2: 5.47~5.725GHz UNII-3: 5.725~5.825GHz |
Channel | 2.4G: 1、2、3、4、5、6、7、8、9、10、11、12、13 5G: 36、40、44、48、52、60、64、149、153、157、161、165 |
Modulation | 802.11b: DSSS (DQPSK, DBPSK, CCK) 802.11g: OFDM (BPSK, QPSK,16-QAM) 802.11n: OFDM (BPSK, QPSK,16-QAM, 64-QAM) 802.11ac: OFDM (BPSK, QPSK,64-QAM, 256-QAM) |
Transmission Rate | 11b up 11Mbps，11g up 54Mbps，11n up 300Mbps 11ac up 867Mbps |
Receiver Sensitivity | 2.4G: 11b：＜-90±1.5dBm @1Mbps， ＜-84±1.5dBm dBm@11Mbps 11g：＜-86±1.5dBm@6Mbps， ＜-69±1.5dBm @54Mbps 11n 20MHz：＜-85±1.5dBm@MCS0， ＜-67±1.5dBm @MCS7 11n 40MHz：＜-82±1.5dBm @MCS0， ＜-64±1.5dBm @MCS7 5G: 11a：＜-86±1.5dBm @6Mbps， ＜-69±1.5dBm @54Mbps 11n 20MHz：＜-85±1.5dBm@MCS0， ＜-67±1.5dBm @MCS7 11n 40MHz：＜-82±1.5dBm @MCS0， ＜-64±1.5dBm @MCS7 11ac 20MHz：＜-84±1.5dBm @MCS0， ＜-59±1.5dBm @MCS8 11ac 40MHz：＜-82±1.5dBm @MCS0， ＜-56±1.5dBm @MCS9 11ac 80MHz：＜-78±1.5dBm @MCS0， ＜-52±1.5dBm @MCS9 |
Transmit Power | 11b: 18dBm±1.5dBm@11Mbps 11g: 15dBm±1.5dBm@54Mbps 11n(20/40MHz): 15dBm±1.5dBm@MCS7 11ac(40/80MHz): 14dBm±1.5dBm@MCS9 |
Software Functions | |
Working Mode | Integrated Fat-Thin |
Capacity | 100 Users |
Management mode | English WEB remote management / Cloud platform management / Mini Program management |
Status | - Device Status: CPU usage, remaining memory, number of wireless users, device information (device name, device model, software version, serial number, MAC address, system time, total memory, remaining memory, uptime) - System Log |
Basic Management | - LAN Settings: Automatic/Static IP, WAN Port VLAN, LAN Port VLAN, MAC Address - DHCP Configuration: Disabled/Normal/Advanced Settings - Mode Switching: Router/AP, DHCP Server (Enable/Disable) |
Wireless | 2.4GHz Wireless Configuration: - SSID Settings: SSID (GB2312/UTF-8), VLAN ID, Encryption, WiFi password (supports up to 5 SSIDs) - Basic Settings: Wireless Network On/Off, Region, Channel, Bandwidth, Transmission Power, AP Advanced (Network Mode/AP Isolation/Multicast [Off/Multicast to Multicast/Multicast to Unicast]/Weak Signal Disconnection) - WDS Settings: WDS Mode (Off/Self-learning Mode/Bridge Mode/Repeater Mode), Connection Status - User List (IP Address, MAC Address, Signal Strength, Transmission Rate, Reception Rate) 5.8GHz Wireless Configuration: - SSID Settings: SSID (GB2312/UTF-8), VLAN ID, Encryption, WiFi password (supports up to 5 SSIDs) - Basic Settings: Wireless Network On/Off, Region, Channel, Bandwidth, VHT Bandwidth, Transmission Power, AP Advanced (Network Mode/AP Isolation/Multicast [Off/Multicast to Multicast/Multicast to Unicast]/Weak Signal Disconnection) - WDS Settings: WDS Mode (Off/Self-learning Mode/Bridge Mode/Repeater Mode), Connection Status - User List (IP Address, MAC Address, Signal Strength, Transmission Rate, Reception Rate) |
ARP List | ARP List (IP Address, MAC Address, Interface, Type, Status, Action [Static/Unique]) Supports All Unique, All Static, All Dynamic, Export List Information, Export Binding Information, Import Binding Information, Add Binding, Refresh |
AC Platform Client | Status switch, Server Address, Device Name, Group Name, Maximum Number of Users, Maximum Number of 5G Users, Transmission Power, AP Isolation, Remark, DHCP Defense, Current Connection Status |
Network Tools | Ping Test, TraceRoute |
System Management | - Configuration Management: Backup and Import, Factory Reset - System Upgrade: Local Upgrade - Device Restart: Immediate Restart/Scheduled Restart - Device Name: Project Name, Device Name, Host Name, Internal Domain Name |
